Exam Details
| Subject | Construction Supervision and Building Maintenance | |
| Paper | ||
| Exam / Course | Diploma in Civil Engineering (DCLE - G) | |
| Department | School of Engineering & Technology (SOET) | |
| Organization | indira gandhi national open university | |
| Position | ||
| Exam Date | June, 2015 | |
| City, State | new delhi, |
Question Paper
1. Select the most appropriate answer from the given alternatives in the following:
The procurement of materials is the concern of
Top level management
Middle level management
First-line management
Store-keeper
A draWing representing all the three dimensions of an object is
Plan
Elevation
Isometric view
Parametric view
The drawing sheet size 594 mm x 841 mm refers to
Ao sheet
Al sheet
A2 sheet
A3 sheet
Drawings that provide necessary information regarding plumbing for water supply and drawings of wiring for electrification etc. are called
Service drawings
Fabrication drawings
Detailed drawings
GA drawings
Which defect in timber is caused by Fungi?
Heart rot
Wane
Knots
Coarse grain
The content determines the properties of steel.
Silicon
Carbon
Tungsten
Sulphur
The trap fitted in the waste pipe under the wash basin is called
pipe trap
waste trap
bottle trap
gully trap
What steps should a construction supervisor take to ensure the progress in the construction project?
Describe the various types of drawings used in a construction project.
What do you understand by Muster Roll Explain its need and draw typical format of a Muster Roll.
Describe the importance and content of a site diary.
Discuss the defects in plumbing lines.
Describe the check-list for supervising a plastering and pointing work.
Describe the methods of application of preservatives for preservation of timber.
Describe the different methods of jointing in PVc pipes.
Describe, in brief, the common defects in flooring.
Discuss the sources of defects in brick masonry structures.
7. Write short notes on any two of the following:
Common defects in piling work
Defects in timber due to insects
Phases of a construction project
New materials for strengthening of masonry walls
The procurement of materials is the concern of
Top level management
Middle level management
First-line management
Store-keeper
A draWing representing all the three dimensions of an object is
Plan
Elevation
Isometric view
Parametric view
The drawing sheet size 594 mm x 841 mm refers to
Ao sheet
Al sheet
A2 sheet
A3 sheet
Drawings that provide necessary information regarding plumbing for water supply and drawings of wiring for electrification etc. are called
Service drawings
Fabrication drawings
Detailed drawings
GA drawings
Which defect in timber is caused by Fungi?
Heart rot
Wane
Knots
Coarse grain
The content determines the properties of steel.
Silicon
Carbon
Tungsten
Sulphur
The trap fitted in the waste pipe under the wash basin is called
pipe trap
waste trap
bottle trap
gully trap
What steps should a construction supervisor take to ensure the progress in the construction project?
Describe the various types of drawings used in a construction project.
What do you understand by Muster Roll Explain its need and draw typical format of a Muster Roll.
Describe the importance and content of a site diary.
Discuss the defects in plumbing lines.
Describe the check-list for supervising a plastering and pointing work.
Describe the methods of application of preservatives for preservation of timber.
Describe the different methods of jointing in PVc pipes.
Describe, in brief, the common defects in flooring.
Discuss the sources of defects in brick masonry structures.
7. Write short notes on any two of the following:
Common defects in piling work
Defects in timber due to insects
Phases of a construction project
New materials for strengthening of masonry walls
Other Question Papers
Departments
- Centre for Corporate Education, Training & Consultancy (CCETC)
- Centre for Corporate Education, Training & Consultancy (CCETC)
- National Centre for Disability Studies (NCDS)
- School of Agriculture (SOA)
- School of Computer and Information Sciences (SOCIS)
- School of Continuing Education (SOCE)
- School of Education (SOE)
- School of Engineering & Technology (SOET)
- School of Extension and Development Studies (SOEDS)
- School of Foreign Languages (SOFL)
- School of Gender Development Studies(SOGDS)
- School of Health Science (SOHS)
- School of Humanities (SOH)
- School of Interdisciplinary and Trans-Disciplinary Studies (SOITDS)
- School of Journalism and New Media Studies (SOJNMS)
- School of Law (SOL)
- School of Management Studies (SOMS)
- School of Performing Arts and Visual Arts (SOPVA)
- School of Performing Arts and Visual Arts(SOPVA)
- School of Sciences (SOS)
- School of Social Sciences (SOSS)
- School of Social Work (SOSW)
- School of Tourism & Hospitality Service Sectoral SOMS (SOTHSM)
- School of Tourism &Hospitality Service Sectoral SOMS (SOTHSSM)
- School of Translation Studies and Training (SOTST)
- School of Vocational Education and Training (SOVET)
- Staff Training & Research in Distance Education (STRIDE)
Subjects
- Construction Equipment
- Construction Management
- Construction Supervision and Building Maintenance
- Irrigation Engineering
- Prestressed Concrete
- Soil Mechanics and Foundation Engineering
- Technical Documentation
- Transportation Engineering