Exam Details
| Subject | Manufacturing Processes-II | |
| Paper | ||
| Exam / Course | Diploma in Mechanical Engineering | |
| Department | School of Engineering & Technology (SOET) | |
| Organization | indira gandhi national open university | |
| Position | ||
| Exam Date | December, 2016 | |
| City, State | new delhi, |
Question Paper
No. of Printed Pages: 2
IBME-oMI
DIPLOMA IN MECHANICAL ENGINEERING
Term-End Examination
December, 2016
005i2
BME-054 MANUFACTURING PROCESS -II
Time hours Maximum Marks: 70
Note: Answer any five questions. All questions carry equal marks.
1. Explain the process of Hot Rolling with neat sketch. 7
Explain the process of sheet metal bending operation. 7
2. Explain the operation of Board Drop gravity hammer forging with neat sketch. 7
Explain cutting speed, feed and depth of cut in grinding process. 7
3. Discuss in brief different superfinishing processes. 7
Explain the process of lapping. 7
4. Explain Electroplating with neat sketch. 7
Write the commonly used equipments for Arc Welding. State the principle of Arc Welding. 7
5. Classify different welding processes and explain anyone in brief. 7
Describe the process of MIG Welding with neat sketch. 7
6. Explain the process of Resistance Welding with neat sketch. 7
Explain the process of Oxy-acetylene gas cutting with neat sketch. 7
7. Explain the working of a Band sawing machine. 7
Differentiate between Reciprocating saw and Band saw. 7
8. Write short notes on any two of the following: 2x7=14
Diamond Wheels
Polishing
Gas Welding Flames
Honing
IBME-oMI
DIPLOMA IN MECHANICAL ENGINEERING
Term-End Examination
December, 2016
005i2
BME-054 MANUFACTURING PROCESS -II
Time hours Maximum Marks: 70
Note: Answer any five questions. All questions carry equal marks.
1. Explain the process of Hot Rolling with neat sketch. 7
Explain the process of sheet metal bending operation. 7
2. Explain the operation of Board Drop gravity hammer forging with neat sketch. 7
Explain cutting speed, feed and depth of cut in grinding process. 7
3. Discuss in brief different superfinishing processes. 7
Explain the process of lapping. 7
4. Explain Electroplating with neat sketch. 7
Write the commonly used equipments for Arc Welding. State the principle of Arc Welding. 7
5. Classify different welding processes and explain anyone in brief. 7
Describe the process of MIG Welding with neat sketch. 7
6. Explain the process of Resistance Welding with neat sketch. 7
Explain the process of Oxy-acetylene gas cutting with neat sketch. 7
7. Explain the working of a Band sawing machine. 7
Differentiate between Reciprocating saw and Band saw. 7
8. Write short notes on any two of the following: 2x7=14
Diamond Wheels
Polishing
Gas Welding Flames
Honing
Other Question Papers
Departments
- Centre for Corporate Education, Training & Consultancy (CCETC)
- Centre for Corporate Education, Training & Consultancy (CCETC)
- National Centre for Disability Studies (NCDS)
- School of Agriculture (SOA)
- School of Computer and Information Sciences (SOCIS)
- School of Continuing Education (SOCE)
- School of Education (SOE)
- School of Engineering & Technology (SOET)
- School of Extension and Development Studies (SOEDS)
- School of Foreign Languages (SOFL)
- School of Gender Development Studies(SOGDS)
- School of Health Science (SOHS)
- School of Humanities (SOH)
- School of Interdisciplinary and Trans-Disciplinary Studies (SOITDS)
- School of Journalism and New Media Studies (SOJNMS)
- School of Law (SOL)
- School of Management Studies (SOMS)
- School of Performing Arts and Visual Arts (SOPVA)
- School of Performing Arts and Visual Arts(SOPVA)
- School of Sciences (SOS)
- School of Social Sciences (SOSS)
- School of Social Work (SOSW)
- School of Tourism & Hospitality Service Sectoral SOMS (SOTHSM)
- School of Tourism &Hospitality Service Sectoral SOMS (SOTHSSM)
- School of Translation Studies and Training (SOTST)
- School of Vocational Education and Training (SOVET)
- Staff Training & Research in Distance Education (STRIDE)
Subjects
- Applied Thermal Engineering
- Automobile Engineering
- Basics of Thermal Energy
- CAD / CAM
- CNC Machanics
- Computer Integrated Manufacturing
- Engineering Materials
- Machine Design
- Manufacturing Processes-I
- Manufacturing Processes-II
- Manufacturing Processes-III
- Metrology and Instrumentation
- Power Plant Engineering
- Theory of Machine