Exam Details
Subject | ||
Paper | paper 2 | |
Exam / Course | ||
Department | ||
Organization | telangana public service commission | |
Position | town planning building overseers | |
Exam Date | December, 2015 | |
City, State | telangana, |
Question Paper
1. Continuous thick lInes are drawn for
Options:
1.
V's,ble edges
2.
DImension lInes
3.
H,dden edges
4.
Centre lInes
Question Number: 2 Question Id 4502 Question Type: MCQ Correct: 1.0 Wrong: 0.0 PrOjection lInes are drawn as
Options:
2 COntlfiuOUs thlfi
3.
Dashed thick
4.
Dashed thin
Question Number; 3 Question Id 4503 Question Type: l1CQ Correct: 1.0 Wrong: 0.0
Drawing practice must follow certain rules if it has to serve as a means of communication
Options:
1 ANSI 2.BSB 3 DIN
4. BIS
Question Number: 4 Question Id 4504 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The lines of the lficlined letteflng are drawn at an angle of from the vertical
Options:
1.
25 degrees to the nght
2.
25 degrees to the left 3 15 degrees to the fight
4. 15 degrees to the left
Question Number: 5 Question Id 4505 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The recommended sizes letters numericals in mm. for sub-titles and headings shall be
Options:
1. 15
2. 12
3.
10
4.
6
Question Number: 6 Question Id 4506 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The conventional representation of material is
Options:
1.
Glass
2.
Wood 3 Concrete 4 Metal
Question Number: 7 Question Id 4507 Question Type: MCQ Correct: 1.0 Wrong: 0.0
In sectional views, when the cutting plane passes through the entire object, the sect,onal view obtained IS called
Options:
1. Local section 2 Half section
3.
Full section
4.
Partial section
Question Number: 8 Quution Id 4508 Question Type: MCQ Correct: 1.0 Vrong 0.0
The arrangement of dimensions on the drawing is
•
200 0
.. J
Options:
1 Parallel dllnel1Slons
2.
Chain dimensions
3.
Combined dimensions 4 Co-ordmate dimensions
Question Number: 9 Question Id: 4509 Question Type: MCQ Correct: 1.0 Vrong: 0.0
Two cirdes of different diameters are separated by a certain distance. They may be connected by
Optioos
1.
Internal arc
2.
External arc
3.
Either internal or external arc
4.
Curved arc
Question Number: 10 Question Id 4510 Question Tyflt MCQ Correct: 1.0 Wrong: 0.0
Two sides of a right angled triangle are 6 and 8 umts. The length of the third side IS
Options:
1.
10 units
2.
8 units
3.5
units 4 4 units
Question Number: II Question Id 4511 Question Type: MCQ
Correct: 1.0 Wrong: 0.0 The intenor angle of a regular hexagon IS
Options:
1.
60 degrees
2.
90 degrees
3.
105 degrees
4.
120 degrees
Question u.mber: 12 Question Id 4512 Question MCQ Correct: 1.0 Wrong: 0.0
Diagonals intersect at 90 degrees in a
Options:
1.
parallelogram
2.
Rectangle
3.
Rhombus
4.
Trape2LUm
Question Number: 13 Question Id 4513 Question Type: MCQ Correct: 1.0 'Vrong: 0.0
In a reducing scale, the representative fraction is
Options:
1.
2.
3.
o
4.
Question Number: 14 Question Id 4514 Question Type: MCQ Correct: 1.0 Wrong: 0.0
If 2cms length of the drawing represents 5 metres of the original si2e, the RF is equal to
Options:
1 1500 2 1250 3 1100 4 150
Question Number: 15 Question Id 4515 Question Type: MCQ Correct: 1.0 Wrong: 0.0
When measurements are desired in three units, scale is used
Options:
1.
Diagonal scale
2.
Plain scale
3.
lsomettlc scale
4.
Scale of chords
Question Number: 16 Quesrion Id 4516 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The length of the scale is ems, if RF =1160 and to measure upto 6m
Options:
15
2.
10
3.
15
4.
20
Question Number: 17 Question Id 4517 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The type of scale used to measure or set angles is
Options:
1. Scale of chords 2 Vernier scale
3.
ComparatIVe scale
4.
Diagonal scale
Question Number: 18 Question Id 4518 Question Type: MCQ Correct: t.O Wrong: 0.0
A heptagon has no of sides
Oplions:
14
2.5
3. 6
47
Question Number: 19 Question Id 4519 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Which of the following is a solid of revolution
Options:
1.
Cube
2.
CubOid
3.
Cylinder
4.
Pyramid
Question Number: 20 Queslion Id 4520 Question Type: MCQ Correct: t.O Wrong: 0.0
Which solid represents circular form both in plan and in elevation
Options:
1.
Cylinder
2.
Cone
3.
Sphere
4.
Prism
Question Number: 21 Question Id: 4521 Que5tion Type: MCQ Correct: 1.0 Vrong 0.0
The top view of a cube is
Options:
1.
Square
2.
Rectangle
3.
C,rcle
4.
Hexagon
Question Number: 22 Question Id 4522 Question Type: MCQ Correct: 1.0 Wrong: 0.0
State the quadrant in which the point is located, if the front view is above xy and top view is below xy
Oplions:
1.
60 degrees
2.
90 degrees
3.
Th,rd
4.
Fourth
Question Number: 23 Question Id 4523 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Indicate the position of the point A given in the fig. with respect to the planes of projectIon
0..
Options:
1. Vertical plane 2 Horizontal plane
3.
First quadrant
4.
Third quadrant
Question Number: 24 Question Id 4524 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The possible position of line AB with respect to the planes of projection is
b I
b
Options:
1.
Inclined to one plane
2.
Inclined to both the planes
3.
Parallel to both the planes
4.
Parallel to one plane
Question Number: 25 Question Id 4525 Question Type: MCQ
Correct: 1.0 Vrong 0.0
Solids have number of dllTlensions
Options;
lOne
2 Two
3 Three 4 Four
Question Number: 26 Question Id 4526 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Plane figures in space are not represented by
Options:
1 Three points not on straIght line
2.
Three points on a straight line
3.
A point and a line 4 Twe parallel hnes
Question 'umber: 27 Question Id 4527 Question MCQ Correct: 1.0 Wrong: 0.0
Name the solid if the base plan is a circle and the elevation is a triangle
Options:
1.
Pyramid
2.
Pnsm
3.
Cylinder
4.
Cone
Question Number: 28 Question Id 4528 Question Type: MCQ Correct: 1.0 Wrong; 0.0
View the projections and identify the object
II i
c.e
.I
I I
Options:
1.
Hexagonal prism
2.
Hexagonal pyramid
3.
Rectangular pnsm
4. Rectangular pyramid
Question Number: 29 Question Id: 4529 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The size of a modular brick as per BI S is
Options:
1.
230,,114x76
2.
190x90x40
3.
190x90x90
4.
180x90x90
Question umber: 30 Question Id 4530 Question Type: MCQ Correct: 1.0 Vrong: 0.0
Cutting the brick longitudinally into two equal parts is called
Options:
1.
Bevelled deser
2.
MItred closer 3 King closer
4. Queen closer
Question Number; 3 Question 453 Question Type; MCQ Correct: 1.0 Wrong: 0.0
Alternate courses of headers and stretchers is known as
Options:
1.
Flemish bond
2.
English bond
3.
Header bond
4.
Stretcher bond
Question umber: 32 Question Id 4532 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The process of spreading liquid mortar/cement Slurry over stone/brick joints is called
Optioos:
1.
Grouting
2.
Throating
3.
Coping
4.
Moulding
Question Number: 33 Question Id: 4533 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The stone masonry having fine dressed stones is
Options:
1.
Random rubble masonry
2.
Coursed rubble masonry 3 Ashlar masonry
4. Composite masonry
Question Number: J4 Question Id 4534 Question Type: MCQ Correct: 1.0 Wrong; 0.0
Options:
1 Quain stone
2.
Facing stone
3.
Backing stone 4 Through stone
Question Number: 35 Question Id 4S3S Question Type: MCQ Correct: 1.0 Wrong: 0.0
Bearing capacity is maximum in soils
Options:
1.
Soft Clay
2.
Compact sand
3.
Loose gravel
4.
Hard rock
Question Number: 36 Question Id 4536 Question Type: 1CQ Correct: 1.0 Wrong: 0.0
The purpose of providing foundatIon to a building is
Options:
1. Not to give stability to structure 2 To decrease tlle hfe of structure
3.
To decrease bearing capacity of foundatlon soil
4.
To distribute the load of the structure on a larger area
Question Number: 37 Question Id 4537 Question Type: I1CQ Correct: 1.0 Wrong: 0.0
Raft foundation is provided in
Options:
1. Soft clay soil 2 Sandy SOli 3 Compact gravel soil 4 Hard soil
Question Number: 38 Question Id 45J8 Question I1CQ Correct: 1.0 Wrong: 0.0
Acommon footing provided for two or more columns is known as
Options:
1.
Spread foundation
2.
Combined footing
3.
Raft foundation 4 Pile founa8non
Question Number: 39 Question Id 4539 Question MCQ Correct: 1.0 Wrong: 0.0
The piles which rest on hard strata are known as
Options:
1 Friction piles 2 Sheet piles
3.
Batter piles
4.
Bearing piles
Question Number: 40 Question Id 4540 Question MCQ Correct: 1.0 Wrong: 0.0
is a barrier of impervious material built into a wall or pier to prevent moisture from moving to any part of the building.
Options:
1.
MOisture proofing COurse
2.
Damp proofing course
3.
F,re proofing course
4.
Membrane proofing course
Question umber: 41 Question Id 4541 Question Type: MCQ Correct: 1.0 Wrong: 0.0
A roof having a double slope on all sides, with the lower slope much steeper than the upper
Options:
1. Butterfly roof 2 Mansard roo f
3.
Dutch roof
4.
Cross hIpped roof
Question Number: 42 Question Id 4542 Question Type: MCQ Correct: 1.0 Wrong; 0.0
The slope of terrace slab should be to result in smooth disposal of rainwater
Options:
1.
lIn 60
2.
1 in40
3 lIn 20
4. 1in 10
Question Number: 43 Question Id 4543 Question Type: MCQ Correct: l.0 Wrong: 0.0
Clear d,stance between the supports of an arCh is
Options:
1 Depth
2.
Rise
3.
Span
4.
Breadtl1
Question Number: 44 Question Id 4544 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The wedge shaped units forming the courses of an arch are
Options:
1.
Voussoirs
2.
Key stones 3 Piers
4. Spendril
Question Number: 45 Question Jd 4545 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Options:
11
2.
2
3.
3
44
Question Number: 46 Question Id 4546 Question Type: MCQ Corrfct 1.0 Vrong 0.0
A lintel is a member
Options:
1 Honzontal
2.
Vertical
3.
Inclined
4.
Curved
Question Number: 47 Question Id 4547 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Covering the exposed surface of timber Iplywood by means of a sheet of wood is
Options:
1.
Studding
2.
MouldIng
3.
Veneering
4.
Rebating
Question Number: 48 Question Id 4548 Question Type: MCQ Correct: 1.0 Vrong: 0,0
Mortise tenon joint is a Ian
Options:
1.
Anglejomt
2.
Bearmg Joint
3.
Lengthening Jomt
4.
WldeningjOmt
Question Number: 49 Question Id 4549 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
The contour given to a projecting member is called
Options:
1.
veneenng
2.
Planing
3.
Panehng
4.
MOulding
Question Number: 50 Question Id 4550 Question Type: MCQ
Correct: t.O Wrong: 0.0
Top or uppermost horizontal part of a door frame IS known as
Options:
1.
Rail
2.
Style
3 Head
4. Post
Question Number: 51 Question Id: 4551 Question TYI)t: MCQ Correct: 1.0 Wrong: 0.0
The thickness of a shutter In a framed and panelled door is mm.
Options:
1 30 2 25 3 20 4 15
Question Number: 52 Question Id 4552 Question Type: MCQ Correc.t: 1.0 Wrong: 0.0
Type of wooden Joint used to join style and rail of a door IS
Options:
1 Lengthening 2 Frarrung 3 Beanng 4 Oblique -shouldered
Question umber: S3 Question Id 4553 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The effluent from septic tanks is usually piped into a soak pit, also known as a
Options:
1 Seepage PIt
2. ShallOw Pit 3 Sullage Pit
4. Flare Pit
Question Number: 54 Question Id 4554 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The thickness of plywood used as facmg in a flush door is
Options:
1 12mm. 2 10mm 38mm 44mm
Question Number: 55 Question Id 4555 Question Type: MCQ Correct: 1.0 Wrong: 0.0
For better penetratlon of hghting through windows, they should be
Oillions:
1 Taller 2 Shorter 3 Smaller
4. Narrower
Question Number: 56 Question Id 4SS6 Question Type: MCQ
Correct: 1.0 Wrong: 0.0 For greater uniformity of Internal day light illumination, Wlndows should be located
Options:
2.
Two adjacent walls
3.
Unilateral
4.
Corner windows
Question Number: 57 Question Id 4557 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Span of a kingpost roof truss is meters.
Oplions:
1 15
2. 15
3.12
49
Question Number: 58 Question Id 4SS8 Question Type: MCQ Correct: 1.0 Wrong: 0.0
It is a trap providedlfl a drainage system with a water seal fixed in a suitable positiOn to collect waste water from the scullery, kitchen sink, wash basins, baths and rain water pipes
Options:
1 Floor trap 2 Gully trap 3 Bottle trap
4 P-trap
Question Number: S9 Question Id 4559 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Ratio of rise to span in a king post truss is
Options:
1. 1:2
2.1:2.5
3. 1:3
4. 1:4
Question Number: 60 Question Id 4560 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The bearing on the either Side of an opening of 1 m RCC lintel is
Options
1.
10 ems
2.
12 ems
3.
15 ems
4.
18 ems
Question Number: 61 Question Id: 4561 QutStion Type: MCQ Correct: 1.0 Wrong: 0.0
Compression member of a roof truss is
Options
1.
Rail
2.
Style
3.
Head
4 Post
Question Number-: 62 Question Id 4562 Question TYI>e MCQ Correct: 1.0 Wrong: 0.0
Minimum number of steps in a flight of a staircase is
Options:
1.3
2. 4
35
4. 6
Question Number: 63 Question Id 4563 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Horizontal upper part of a step which is used to rest the foot is
Options:
1.
RIse
2.
Landmg
3.
Tread
4.
Nosing
Question Number: 64 Question Id 4564 Question TyJX' MCQ Correct: t.O Wrong: 0.0
Change in direction is 180 degree between the two flights of a staircase In
Options:
1. Open well 2 Doglegged
3. Spiral 4 8i-furcated
Question Number: 65 Question Id 4565 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The minimum headroom of a staircase should not be less than meters.
Options:
1.
1
2.
1.5
3 1.8
4.2.1
Question umber: 66 Question Id 4566 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Most commonly used staIr in a residence is
Options:
1 Open well 2 Spiral
3.
Doglegged
4.
CIrcular
Question Number: 67 Question Id 4567 Question Type: MCQ Correct: 1.0 Wrong: 0.0
A masonry or RCC chamber constructed for inspection, cleaning and mamtenance of sewer lines IS
Options:
2 Sump
3.
Soak pit
4.
Septic tank
Question Number: 68 Question Id 4568 Question Type: MCQ Correct: 1.0 Wrong; 0.0
Which of the following is not an orthographic prOjection
Options:
1.
Plan
2.
ElevatIon
3.
Section
4.
IsometrIC V,ew
Question Number: 69 QuutiDD Id 4569 Question MCQ Correct: 1.0 Wrong: 0.0
Height of a building in elevation is measured from
Options:
1.
Foundation level
2.
Ground level 3 Floor level
4. SIll level
Question Number: 70 Question Id 4570 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Soiled water disposal is from
Options:
1 Bath tub
2.
K,tchen sink
3.
Water closet 4 waSh baSin
Question Number: 71 Question Id 4571 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The elevation given represents
I. 8"""
Options:
1.
Rail
2.
Stye
3.
Head
4.
Post
Question Number: 72 Question Id 4572 TYIM! MCQ Correct: 1.0 Vrong: 0,0
piles are those which are driven into the ground until a hard stratum is reached
Options:
1 Fnctlon
2 Sheet 3 Beating
4 Anchor
Question Number: 73 Question Id 4573 Typt MCQ Correct: 1.0 Vrong: 0.0
The minimum headroom in a passage under the landing of a staircase and under the staIrcase shall be m
Options:
1 2.2 2 25
3 27
4 15
Question Number: 74 Question Id 4574 Question TYI)f MCQ Correct: t.O Wrong: 0.0
The fIgure gIven below represents
Options:
1 Door 2 WIndow 3 VentilatOr 4 Stair
Question Number: 75 Question Id 4375 Question Typt MCQ Correct: 1.0 Vrong: 0.0
The plumbmg fixture gIven in the fIgure IS
Option, I European W.C 2 IndIan WC
3. BIdet 4 Anglo -IndIan WC
QueSl;on Number: 76 Question Id 4576 Question Type: MCQ Correct: 1.0 Vrong: 0.0
What IS the prinCIple of compass surveYIng?
Options:
I Traversing 2 F,eld plomng
3. Contourmg 4 Tnangula Ion
Question Number: 77 Question Id 4577 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
In Simpson's formula of area calculation, the line jOining the tOP of the ordinates is assumed as
Options:
1.
Circular
2.
Parabolic 3 ElliptICal 4 StraIght line
Queslioll Number: 78 Queslion Id 4578 Queslion Type: MCQ
Correcl 1.0 Vrong: 0.0
Earth work volume IS gIven by common diStance/3 (Sum of areas of end sectIons 4 times the sum of areas of even sectIons+ 2 times the sum of areas of odd section) In Formula
Options:
I Pnsmoidal 2 Trapezoidal
3. Rectangular 4 CIrcular
Question Number: 79 Question Id 4579 Question Type: MCQ Correct: 1.0 Wrong: 0.0
What is RB in compass surveying?
Options:
L Reference Boundary
2.
Reduced Bearing
3.
Reduced Boundary
4.
Reference Beanng
Question Number: 80 Question Id 4580 Question Type: MCQ Correct: 1.0 Vrong: 0.0
Which prevents the magnetic needle from showing magnetic north
Options:
L Surveyor attraction
2.
Gravitational attraction
3.
Local attraction
4.
Wooden Tnpod
Question Number: 81 Question Id 4581 Question MCQ Correct: 1.0 Wrong: 0.0
The horizontal axis in theodolite is also known as
Options:
1. Collimalion axis
2. Trunmon axis
3.
Bubble level axis
4.
Plumb axiS
Question Number: 82 Question Id 4582 Question Type: MCQ Correct: 1.0 Vrong: 0.0
Latitudes and Departures are used to calculate
Options:
L area
2.
fore bearing
3.
back beanng
4.
Elevation
Question umber: 83 Question Id 4583 Question Type: MCQ Correct: 1.0 Wrong: 0.0
In a rectangular plot of land, ABCD, the bearing of the hne AS IS 28", the bearing of CD is
Options:
188"
1. 208"
2.
168"
3.
152"
Questiun Number: 84 Question Id: 4584 Question Type: MCQ
Con-eel: 1.0 Wrong: 0.0
Spmt level is used to
Options:
1 first aid 2 proflle levellIng 3 levellIng the Instrument 4 dean the level
Question umber: 85 Question Id 4585 Question Type: MCQ
Cor..'t 1.0 Wrong: 0.0 Where is first change point in the folloWIng readings on contInUOuS SlopIng ground? 3 855, 3.285, 1.955, 3215, 1 700, 0.540, 3.640
Options:
1 after 1 955 2 after 3215 3 after 3285 4 after 3 855
Question umber: 86 Question Id 4586 Question TYIlt MCQ Correct: 1.0 Wrong: 0.0
The dimension of the smallest division on the levelling staff is
Options:
1 0.050 m 20 SOOm 3 0.005m
4 0.001 m
Question NUlllber 87 Question Id 4587 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The cross sectional area of an Embankment is given by., where b is top Wldth, s is side stope and h is height
Options:
1 h 2 h 3 h 4 h
Question Number: 88 Question Id 4588 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The fundamental prinCIple of surveying 15 to work from the
Options:
1 part to the whole 2 whole to the part 3 centre to the outer 4 part to the sectlon
Question umber: 89 Question Id 4589 Question Type: MCQ
Cor..,t 1.0 Wrong: 0.0 Number of links in a 20 m Chain are
°l,tions:
2 150 3 100 4 66
Question umber: 90 Question Id 4590 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The line on which frame work of the survey IS planned Options 1 Check hne
2 Plan hne 3 Base line 4 T,e hne
Qurstion Number: 91 Question Id: 4591 Question Type: MCQ Correct: 1.0 Wrong: 0.0
In site plan of the bUlldmg, which set back IS usually more?
Options:
1 front 2 left SIde
3. right SIde 4 rear
Question Number: 92 Question Id 4592 Question TyPf MCQ Correct: 1.0 Wrong: 0.0
Two continuous parallel lines symbol indicates the
Options:
1 Foot path 2 Metalled road
3. Unmetalled road 4 Smgle railway hne
QutStion Number: 93 Question Id 4593 Question Type: MCQ Correct: 1.0 Wrong: 0.0
ChaIn survey is suitable when the given area is
Options:
1 SlfTlple faIrly level 2 Undulating 3 Crowded WIth features 4 Filled WIth lot of obstructions
Question Number: 94 Question Id 4594 Question Type: MCQ Corred 1.0 Wrong: 0.0
Well conditioned triangle contains angles between (in degrees)
Options:
1 30 and 120 2 20 and 140 315and150 418and144
Question NUllIber 95 Question Id 4595 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
The Cham man who the chain m chain surveYing IS known as
Options:
1 Follower 2 Captain 3 Ranger Leader
Question Number: 96 Question Id 4596 Question Type: llCQ Corrert 1.0 Wrong: 0.0
In setting out nght angle on cham, which of the folloWIng set of dimensions are usually taken
Options:
1 5-12-13m
26-8-10m
3 3-4-5m
4 m
Question Number: 97 Question Id 4597 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The main survey stations are located on the ground, by
Options:
1 reference sketch
2 lOde>< sketch 3 rough sketch rnain sketch
Question Number: 98 Question Id 4598 Question Type: l1CQ Correct: 1.0 Wrong: 0.0
The symbol gIven, indicates
...
I
I1 I .J
Options:
1 Orchard
2 Hedge
3 Wire fencmg
Railway
Question Number: 99 Que tion Id 4599 Question Type: l1CQ Correct: 1.0 Vrong: 0.0
The symbol given indicates
Options:
3.
Bench mark
4.
Base mark
Queslion Number: tOO Question Id 4600 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The symbol gIven indicates
•
Options:
1.
Bench mark
2.
Barren land
3.
Cultivated land
4.
Boundary Pillar
Question Number: 101 Question Id 4601 Question Type: MCQ
1.0 Wrong: 0.0 Planimeter method of calculation of area is ... method
Options:
1.
statistICal
2.
analytical 3 Instrumental
4. ordinate
Question Number: 102 Question Id 4602 Question Type: MCQ Correct: 1.0 Vrong: 0.0
In which corner, on the plotted sheet, the title block is drawn?
Options:
1 right top
2.
left top
3.
right bottom 4 left bottom
Question Number: 103 Question Id 4603 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Which of the following is not used to set out a perpendicular on a chain line
Options:
1.
French cross staff
2.
OptiCal square
3.
Site square
4.
Brass Tag
Question Number: 104 Question Id 4604 Question Type: MCQ COrTcct 1.0 Vrong 0.0
The limiting length of an offset does not depend upon
Options:
1.
The number of features to be surveyed
2.
Accuracy of work
3.
Maximum error In laYing off the direction of offset
4 Scale of plottmg
Question umber: 105 Question Id 4605 Question Type: MCQ Correct: 1.0 Vrong 0.0
V'Jhat is the principle of chain surveying?
Options:
1 Traversing
2.
Follower and surveyor
3.
Contouring 4 Triangulation
Question Number: 106 Question Id 4606 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The levelling from the finishing pOint of a day to starting point of that day is known as
Options:
1. Check LevellIng 2 Profile levelling
3.
Fly levelling
4.
Differential levelling
Question Number: 107 Question Id 4607 Question Type: MCQ Correct: 1.0 Vrong: 0.0
Following colour is used to indicate the symbol of footpath
Options:
1.
Prussian blue
2.
Black
3.
Crimson lake
4.
Yellow
Question Number: 108 Question Id 4608 Question Type: I1CQ Correct: 1.0 Wrong: 0.0
Express the scale 1 cm 4min RF
Options:
1 1/200
2.
1/300
3.
1/400 4 1/800
Question Number: 109 Question Id 4609 Question Type: MCQ Correct: 1.0 Wrong: 0.0
the diaphragm is fitted in front of
Options:
1.
rruddie of telescope
2.
bubble tube
3.
object glass
4.
eye piece
Question Number: 110 Question Id 4610 Question Type MCQ Correct: 1.0 Wrong; 0.0
Options:
N 74'W
1.
N E
2.
S 74'W
3.
S E
4.
Question Number: 111 Question Id: 4611 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The bench marks established by the Survey of India are known as bench marks.
Options:
1. Permanent 2.GTS 3 Temporary
4. Arbitrary
Question Number: 112 Question Id 4612 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Which of the following is not a natural error in levelling?
Options:
1.
Earth's curvature
2.
Re fraction
3.
Temperature variation
4.
Error due to sluggIsh bubble
Question Number: 113 Question Id 4613 Question Type: MCQ Correct: 1.0 Wrong: 0.0
In the prismatic compass, which end of the graduation ring is marked with zero?
Options:
1.
North
2.
East
3.
South 4 West
Question Number: 114 Question Id 4614 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The prismatic compass box is generally made of
Options:
1 Brass
2 Iron
3.
Silver
4.
Alurrunlum
Question Number: 115 Question Id: 4615 Question Type: MCQ Correct: 1.0 'Vrong: 0.0
The maximum angular error of closure (tn Minutes) in Compass survey, with N number of sides, IS
Options:
1
1S"lN
2
2S"IN
3.
1O"IN
4.
Question Number: 116 Question Id 4616 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The dip of the magnetic needle at the equator of the earth, in degrees is
Options:
1. 270
2. 180
3. 90
4. 0
Question Number: 117 Question Id 4617 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
The fore bearing of a line AB is N2so30'E, what is rts Back bearing?
Options:
N2so30'W
1.
S2so30'W
2.
S2so30'E
3.
N64°30'E
4.
Question Number: 118 Question Id 4618 Question MCQ Correct: 1.0 Wrong: 0.0
A plane whICh is tangential to the level surface at a point is
Options:
1.
Honzontal plane
2.
Vertical Plane
3.
Tangential plane
4.
Level plane
Question Number: 119 Question Id 4619 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
Prism is used to take the reading in 1. Surveyor's compass 2. Prismatic compass 3. Level
Options:
1 10niy
2 2 only
3.
1and 2
4.
1and3only
Question Number: 120 Question Id 4620 Question Type: MCQ Correct: 1.0 "hong: 0.0
Length of the telescopic levelling staff IS
Options:
1. 2m
25m 34m 4.3m
Qurstion Numbtr: 121 Question Id: 4621 Question Type: 1CQ Correct: 1.0 Wrong: 0.0
Convert the WCB 188' into RB
Options
N8'W
1
E
2
S8'W
3
S E
4
Question umber: 122 Question Id 4622 Question Type: 1CQ Correct: 1.0 Wrong: 0.0
The staff reading obtaIned on a point of known elevation is called as
Options
1 fore slgnt readIng
2. Intermediate sight reading 3 back sight reading 4 baCking Sight readIng
Question Numbu: 123 Question Jd 4623 Question Type: MCQ Correct: t.O Wrong: 0.0
GTS in surveying means
Options:
1 Great Tangential survey 2 Great Tngonometncal survey
3 Global Tngonometncal survey
4 Global Team survey
Question Numbtr: 124 Question Id 4624 Question Type: l1CQ Correct: 1.0 Vrong: 0.0
Anthme Ical check for Height of Instrument method IS given by sum of back SIghts -sum of fore SIghts
OptiOns
1 Last RL -FITSt RL 2 Last RL FITSt RL 3 FITSt RL -Last RL 4 ?BS -bench mark
Quostion umbo.: 125 QUfStion Id 4625 Question Type: lCQ Correct: 1.0 Wrong: 0.0
The Perrrussible error in Accurate levelhng, If Distance In kilometers
Options:
1 0.012
0.12,1d
2.
0.00012,ld
4.
Question Number: 126 Question Id 4626 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Levelling done along the centre of the road at a regular interval is known as
Options:
1.
C S Levelling
2.
ProflIe levellIng
3.
Differential levellIng
4.
Fly levellmg
Question Number: 127 Question Id 4627 Question Type: MCQ
Correct; 1.0 Wrong: 0.0
The imperfect levelling of the instrument comes under
Options:
1.
Personal error
2.
Instrumental error
3 Natural error
4. Permanent error
Question Number: 128 Question Id 4628 Question TYI.e MCQ Correct: 1.0 Wrong: 0.0
Back sight taken on bench mark of 100.00 m is 2.600 and foresIght of a point IS 2.500. What is the RL of this point?
Options:
1. 101.10m 2.99.10m 39990m
4.100.10 m
Question "'umber: 129 Question Id 4629 Question Type: MCQ Correct: 1.0 Wrong: 0.0
In plotting of cross section, the usual horizontal and vertical scales are ..... respeCtively
Options:
1.
1:400, 1:100
2.
1 400, 1:200
3.
1:400, 1:300
4.
100, 1:400
Question Number: 130 Question Id 4630 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
The bench mark provided at the end of the day's work in longitudinal levellIng IS called ...... Bench mark
Options:
1.
GTS
2.
Permanent
3.
Temporary
4 Dally
Question Number; 131 Question Id: 4631 Question Type: MCQ Correct: 1.0 Wrong: 0.0
A contour line intersects a ridge line or valley hne
Options:
1. Perpendicularly always at 30· to Vertical
2
3 always at 45·
4 HonzOntally
Question Numb.r: 132 Question Id 4632 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The vertical distance between adjacent contour hnes IS
Options:
1 VertICal gradient 2 COntour interval 3 Vertical eqUl"alent
4. Ridge Interval
Question Number: 133 Question Id 4633 Question Type: MCQ Correct: 1.0 Vrong: 0.0
In a contour map. the higher value contours are towards inside the loop. This indicates
Options:
1. Hill 2 Pond
3. Level ground 4 Valley
Question Number: 134 Question Id 4634 Question Type: I1CQ Correct: 1.0 Wrong: 0.0
The alignment of highway is usually fOllows
Options:
1 valley hne 2 ridge line
3. across the contour line 4 perpendICular to ndge hne
Question Number: 135 Questioold 4635 Question Type: 1CQ Correct: 1.0 Vrong: 0.0
What survey instrument IS used to calculate the capacity of reservOir
Options:
1 Cham
2. Compass 3 Plane table 4 Level
Question Number: 136 Question Id 4636 Question Type: MCQ Correcl 1.0 Wrong: 0.0
The method used to calculate the capacity of reservolf
Options:
1 contounng 2 chfferentlalleveJhng 3 Plane table surveY'ng 4 SecuonlOg
Question 'umber; 137 Question Id 4637 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The contour mterval for a any map IS kept
Options:
1 zero 2 vanable 3 gradually mcreaslOg 4 constant
Question 138 Question Id 4638 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Contours of dIfferent elevations, crossIng each other Indicates
Options:
1 saddle 2 verucal clIff 3 overhanging clI rf 4 sloping clIff
Question Number: 139 Question Id 4639 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The surveyor raises his both hands above head and then brings down, his intention is
Options:
1 ASSistant to move left 2 ASSistant poSltion IS correct 3 ASSistant to move nght 4 Asslstant to fix the rangmg rod
Question 'umber: 140 Question ld 4640 Question Type: MCQ
Correct: 1.0 Wrong: 0.0 When both ends of the survey are not mtervlslble, the rangmg adopted is
Options:
1 Parallel rangmg 2 D,rect rangmg 3 Anal rangmg 4 IndIrect rangmg
Question 'umber: 141 Question Id: 4641 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Length of the commonly used ranging rod is
Options:
12m 23m 34m
41 m
Question Number: 142 Question Id 4642 Question Type: MCQ Correct: 1.0 Wrong: 0.0
What are the errors in compass surveYing 1 Personal 2 Instrumental 3. Natural
Options;
1 1 and 2 only 2 1,2 and 3 3 2 and 3 only 4 3 only
Question Number: 143 Question Id 4643 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
In pnsmauc compass, which is used to stop the osallauons of the graduated nng?
Options:
1 LI fung pin 2 Pnsm 3 Brake PIO
4. Glass cover
Question Number: 144 Question Id: 4644 Queslion Type: l1CQ Correct: 1.0 Wrong: 0.0
Determining the difference in elevation between two POlOtS on the surface of the earth, is known as
Options:
1. Differential levelling 2 Simple levelltng 3 Block levelling 4 Fly levelltng
Question Number: 145 Question Id: 4645 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Lateral distance of an object or feature measured Wlth reference to a survey line IS called as
Options:
1 Lalltude 2 Departw'e 3 Offset 4 Field length
Question 'umber: 146 Question Id 4646 Questioo Type MCQ
Correcl 1.0 Wrong: 0.0
True North is west of Magnetic North by 4" This is known as
Option.s
1. Dechnation East 2 DeclInatIOn West 3 Decllnatlon South 4 Dechnatlon North
Question Number: 147 Question Id: 4647 Question TyIX MCQ
Correct: 1.0 Wrong: 0,0
Options:
1 adde<l 2 doubled 3 subtracte<l 4 muItiplie<l
Question Number: 148 Question Id 4648 Question MCQ
Correct: 1.0 Wrong: 0.0
Which of the folloWIng hnes length and magnetic bearings are measured to check the accuracy of open traverse?
Oplions:
1 OblIque offsets
2 Cut-off hnes 3 Base lines 4 Feature lInes
Question umber: 149 Question Id 4649 Question MCQ Corrtd 1.0 Vrong: 0.0
Which of the following IS not a type of variation of magnetic decImation
Options:
1 Annual vanatlon 2 Secular anatlon
3.
Diurnal variation
4.
Thermal vanatlon
Question Number: ISO Question Id 4650 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
In a closed traverse of sides, what IS the sum of the measure<l interior angles, generally as a check?
Options:
(2n
1.
(2n x90' 2.
3 (2n x
(2n
4.
Options:
1.
V's,ble edges
2.
DImension lInes
3.
H,dden edges
4.
Centre lInes
Question Number: 2 Question Id 4502 Question Type: MCQ Correct: 1.0 Wrong: 0.0 PrOjection lInes are drawn as
Options:
2 COntlfiuOUs thlfi
3.
Dashed thick
4.
Dashed thin
Question Number; 3 Question Id 4503 Question Type: l1CQ Correct: 1.0 Wrong: 0.0
Drawing practice must follow certain rules if it has to serve as a means of communication
Options:
1 ANSI 2.BSB 3 DIN
4. BIS
Question Number: 4 Question Id 4504 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The lines of the lficlined letteflng are drawn at an angle of from the vertical
Options:
1.
25 degrees to the nght
2.
25 degrees to the left 3 15 degrees to the fight
4. 15 degrees to the left
Question Number: 5 Question Id 4505 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The recommended sizes letters numericals in mm. for sub-titles and headings shall be
Options:
1. 15
2. 12
3.
10
4.
6
Question Number: 6 Question Id 4506 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The conventional representation of material is
Options:
1.
Glass
2.
Wood 3 Concrete 4 Metal
Question Number: 7 Question Id 4507 Question Type: MCQ Correct: 1.0 Wrong: 0.0
In sectional views, when the cutting plane passes through the entire object, the sect,onal view obtained IS called
Options:
1. Local section 2 Half section
3.
Full section
4.
Partial section
Question Number: 8 Quution Id 4508 Question Type: MCQ Correct: 1.0 Vrong 0.0
The arrangement of dimensions on the drawing is
•
200 0
.. J
Options:
1 Parallel dllnel1Slons
2.
Chain dimensions
3.
Combined dimensions 4 Co-ordmate dimensions
Question Number: 9 Question Id: 4509 Question Type: MCQ Correct: 1.0 Vrong: 0.0
Two cirdes of different diameters are separated by a certain distance. They may be connected by
Optioos
1.
Internal arc
2.
External arc
3.
Either internal or external arc
4.
Curved arc
Question Number: 10 Question Id 4510 Question Tyflt MCQ Correct: 1.0 Wrong: 0.0
Two sides of a right angled triangle are 6 and 8 umts. The length of the third side IS
Options:
1.
10 units
2.
8 units
3.5
units 4 4 units
Question Number: II Question Id 4511 Question Type: MCQ
Correct: 1.0 Wrong: 0.0 The intenor angle of a regular hexagon IS
Options:
1.
60 degrees
2.
90 degrees
3.
105 degrees
4.
120 degrees
Question u.mber: 12 Question Id 4512 Question MCQ Correct: 1.0 Wrong: 0.0
Diagonals intersect at 90 degrees in a
Options:
1.
parallelogram
2.
Rectangle
3.
Rhombus
4.
Trape2LUm
Question Number: 13 Question Id 4513 Question Type: MCQ Correct: 1.0 'Vrong: 0.0
In a reducing scale, the representative fraction is
Options:
1.
2.
3.
o
4.
Question Number: 14 Question Id 4514 Question Type: MCQ Correct: 1.0 Wrong: 0.0
If 2cms length of the drawing represents 5 metres of the original si2e, the RF is equal to
Options:
1 1500 2 1250 3 1100 4 150
Question Number: 15 Question Id 4515 Question Type: MCQ Correct: 1.0 Wrong: 0.0
When measurements are desired in three units, scale is used
Options:
1.
Diagonal scale
2.
Plain scale
3.
lsomettlc scale
4.
Scale of chords
Question Number: 16 Quesrion Id 4516 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The length of the scale is ems, if RF =1160 and to measure upto 6m
Options:
15
2.
10
3.
15
4.
20
Question Number: 17 Question Id 4517 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The type of scale used to measure or set angles is
Options:
1. Scale of chords 2 Vernier scale
3.
ComparatIVe scale
4.
Diagonal scale
Question Number: 18 Question Id 4518 Question Type: MCQ Correct: t.O Wrong: 0.0
A heptagon has no of sides
Oplions:
14
2.5
3. 6
47
Question Number: 19 Question Id 4519 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Which of the following is a solid of revolution
Options:
1.
Cube
2.
CubOid
3.
Cylinder
4.
Pyramid
Question Number: 20 Queslion Id 4520 Question Type: MCQ Correct: t.O Wrong: 0.0
Which solid represents circular form both in plan and in elevation
Options:
1.
Cylinder
2.
Cone
3.
Sphere
4.
Prism
Question Number: 21 Question Id: 4521 Que5tion Type: MCQ Correct: 1.0 Vrong 0.0
The top view of a cube is
Options:
1.
Square
2.
Rectangle
3.
C,rcle
4.
Hexagon
Question Number: 22 Question Id 4522 Question Type: MCQ Correct: 1.0 Wrong: 0.0
State the quadrant in which the point is located, if the front view is above xy and top view is below xy
Oplions:
1.
60 degrees
2.
90 degrees
3.
Th,rd
4.
Fourth
Question Number: 23 Question Id 4523 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Indicate the position of the point A given in the fig. with respect to the planes of projectIon
0..
Options:
1. Vertical plane 2 Horizontal plane
3.
First quadrant
4.
Third quadrant
Question Number: 24 Question Id 4524 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The possible position of line AB with respect to the planes of projection is
b I
b
Options:
1.
Inclined to one plane
2.
Inclined to both the planes
3.
Parallel to both the planes
4.
Parallel to one plane
Question Number: 25 Question Id 4525 Question Type: MCQ
Correct: 1.0 Vrong 0.0
Solids have number of dllTlensions
Options;
lOne
2 Two
3 Three 4 Four
Question Number: 26 Question Id 4526 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Plane figures in space are not represented by
Options:
1 Three points not on straIght line
2.
Three points on a straight line
3.
A point and a line 4 Twe parallel hnes
Question 'umber: 27 Question Id 4527 Question MCQ Correct: 1.0 Wrong: 0.0
Name the solid if the base plan is a circle and the elevation is a triangle
Options:
1.
Pyramid
2.
Pnsm
3.
Cylinder
4.
Cone
Question Number: 28 Question Id 4528 Question Type: MCQ Correct: 1.0 Wrong; 0.0
View the projections and identify the object
II i
c.e
.I
I I
Options:
1.
Hexagonal prism
2.
Hexagonal pyramid
3.
Rectangular pnsm
4. Rectangular pyramid
Question Number: 29 Question Id: 4529 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The size of a modular brick as per BI S is
Options:
1.
230,,114x76
2.
190x90x40
3.
190x90x90
4.
180x90x90
Question umber: 30 Question Id 4530 Question Type: MCQ Correct: 1.0 Vrong: 0.0
Cutting the brick longitudinally into two equal parts is called
Options:
1.
Bevelled deser
2.
MItred closer 3 King closer
4. Queen closer
Question Number; 3 Question 453 Question Type; MCQ Correct: 1.0 Wrong: 0.0
Alternate courses of headers and stretchers is known as
Options:
1.
Flemish bond
2.
English bond
3.
Header bond
4.
Stretcher bond
Question umber: 32 Question Id 4532 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The process of spreading liquid mortar/cement Slurry over stone/brick joints is called
Optioos:
1.
Grouting
2.
Throating
3.
Coping
4.
Moulding
Question Number: 33 Question Id: 4533 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The stone masonry having fine dressed stones is
Options:
1.
Random rubble masonry
2.
Coursed rubble masonry 3 Ashlar masonry
4. Composite masonry
Question Number: J4 Question Id 4534 Question Type: MCQ Correct: 1.0 Wrong; 0.0
Options:
1 Quain stone
2.
Facing stone
3.
Backing stone 4 Through stone
Question Number: 35 Question Id 4S3S Question Type: MCQ Correct: 1.0 Wrong: 0.0
Bearing capacity is maximum in soils
Options:
1.
Soft Clay
2.
Compact sand
3.
Loose gravel
4.
Hard rock
Question Number: 36 Question Id 4536 Question Type: 1CQ Correct: 1.0 Wrong: 0.0
The purpose of providing foundatIon to a building is
Options:
1. Not to give stability to structure 2 To decrease tlle hfe of structure
3.
To decrease bearing capacity of foundatlon soil
4.
To distribute the load of the structure on a larger area
Question Number: 37 Question Id 4537 Question Type: I1CQ Correct: 1.0 Wrong: 0.0
Raft foundation is provided in
Options:
1. Soft clay soil 2 Sandy SOli 3 Compact gravel soil 4 Hard soil
Question Number: 38 Question Id 45J8 Question I1CQ Correct: 1.0 Wrong: 0.0
Acommon footing provided for two or more columns is known as
Options:
1.
Spread foundation
2.
Combined footing
3.
Raft foundation 4 Pile founa8non
Question Number: 39 Question Id 4539 Question MCQ Correct: 1.0 Wrong: 0.0
The piles which rest on hard strata are known as
Options:
1 Friction piles 2 Sheet piles
3.
Batter piles
4.
Bearing piles
Question Number: 40 Question Id 4540 Question MCQ Correct: 1.0 Wrong: 0.0
is a barrier of impervious material built into a wall or pier to prevent moisture from moving to any part of the building.
Options:
1.
MOisture proofing COurse
2.
Damp proofing course
3.
F,re proofing course
4.
Membrane proofing course
Question umber: 41 Question Id 4541 Question Type: MCQ Correct: 1.0 Wrong: 0.0
A roof having a double slope on all sides, with the lower slope much steeper than the upper
Options:
1. Butterfly roof 2 Mansard roo f
3.
Dutch roof
4.
Cross hIpped roof
Question Number: 42 Question Id 4542 Question Type: MCQ Correct: 1.0 Wrong; 0.0
The slope of terrace slab should be to result in smooth disposal of rainwater
Options:
1.
lIn 60
2.
1 in40
3 lIn 20
4. 1in 10
Question Number: 43 Question Id 4543 Question Type: MCQ Correct: l.0 Wrong: 0.0
Clear d,stance between the supports of an arCh is
Options:
1 Depth
2.
Rise
3.
Span
4.
Breadtl1
Question Number: 44 Question Id 4544 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The wedge shaped units forming the courses of an arch are
Options:
1.
Voussoirs
2.
Key stones 3 Piers
4. Spendril
Question Number: 45 Question Jd 4545 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Options:
11
2.
2
3.
3
44
Question Number: 46 Question Id 4546 Question Type: MCQ Corrfct 1.0 Vrong 0.0
A lintel is a member
Options:
1 Honzontal
2.
Vertical
3.
Inclined
4.
Curved
Question Number: 47 Question Id 4547 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Covering the exposed surface of timber Iplywood by means of a sheet of wood is
Options:
1.
Studding
2.
MouldIng
3.
Veneering
4.
Rebating
Question Number: 48 Question Id 4548 Question Type: MCQ Correct: 1.0 Vrong: 0,0
Mortise tenon joint is a Ian
Options:
1.
Anglejomt
2.
Bearmg Joint
3.
Lengthening Jomt
4.
WldeningjOmt
Question Number: 49 Question Id 4549 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
The contour given to a projecting member is called
Options:
1.
veneenng
2.
Planing
3.
Panehng
4.
MOulding
Question Number: 50 Question Id 4550 Question Type: MCQ
Correct: t.O Wrong: 0.0
Top or uppermost horizontal part of a door frame IS known as
Options:
1.
Rail
2.
Style
3 Head
4. Post
Question Number: 51 Question Id: 4551 Question TYI)t: MCQ Correct: 1.0 Wrong: 0.0
The thickness of a shutter In a framed and panelled door is mm.
Options:
1 30 2 25 3 20 4 15
Question Number: 52 Question Id 4552 Question Type: MCQ Correc.t: 1.0 Wrong: 0.0
Type of wooden Joint used to join style and rail of a door IS
Options:
1 Lengthening 2 Frarrung 3 Beanng 4 Oblique -shouldered
Question umber: S3 Question Id 4553 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The effluent from septic tanks is usually piped into a soak pit, also known as a
Options:
1 Seepage PIt
2. ShallOw Pit 3 Sullage Pit
4. Flare Pit
Question Number: 54 Question Id 4554 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The thickness of plywood used as facmg in a flush door is
Options:
1 12mm. 2 10mm 38mm 44mm
Question Number: 55 Question Id 4555 Question Type: MCQ Correct: 1.0 Wrong: 0.0
For better penetratlon of hghting through windows, they should be
Oillions:
1 Taller 2 Shorter 3 Smaller
4. Narrower
Question Number: 56 Question Id 4SS6 Question Type: MCQ
Correct: 1.0 Wrong: 0.0 For greater uniformity of Internal day light illumination, Wlndows should be located
Options:
2.
Two adjacent walls
3.
Unilateral
4.
Corner windows
Question Number: 57 Question Id 4557 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Span of a kingpost roof truss is meters.
Oplions:
1 15
2. 15
3.12
49
Question Number: 58 Question Id 4SS8 Question Type: MCQ Correct: 1.0 Wrong: 0.0
It is a trap providedlfl a drainage system with a water seal fixed in a suitable positiOn to collect waste water from the scullery, kitchen sink, wash basins, baths and rain water pipes
Options:
1 Floor trap 2 Gully trap 3 Bottle trap
4 P-trap
Question Number: S9 Question Id 4559 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Ratio of rise to span in a king post truss is
Options:
1. 1:2
2.1:2.5
3. 1:3
4. 1:4
Question Number: 60 Question Id 4560 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The bearing on the either Side of an opening of 1 m RCC lintel is
Options
1.
10 ems
2.
12 ems
3.
15 ems
4.
18 ems
Question Number: 61 Question Id: 4561 QutStion Type: MCQ Correct: 1.0 Wrong: 0.0
Compression member of a roof truss is
Options
1.
Rail
2.
Style
3.
Head
4 Post
Question Number-: 62 Question Id 4562 Question TYI>e MCQ Correct: 1.0 Wrong: 0.0
Minimum number of steps in a flight of a staircase is
Options:
1.3
2. 4
35
4. 6
Question Number: 63 Question Id 4563 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Horizontal upper part of a step which is used to rest the foot is
Options:
1.
RIse
2.
Landmg
3.
Tread
4.
Nosing
Question Number: 64 Question Id 4564 Question TyJX' MCQ Correct: t.O Wrong: 0.0
Change in direction is 180 degree between the two flights of a staircase In
Options:
1. Open well 2 Doglegged
3. Spiral 4 8i-furcated
Question Number: 65 Question Id 4565 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The minimum headroom of a staircase should not be less than meters.
Options:
1.
1
2.
1.5
3 1.8
4.2.1
Question umber: 66 Question Id 4566 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Most commonly used staIr in a residence is
Options:
1 Open well 2 Spiral
3.
Doglegged
4.
CIrcular
Question Number: 67 Question Id 4567 Question Type: MCQ Correct: 1.0 Wrong: 0.0
A masonry or RCC chamber constructed for inspection, cleaning and mamtenance of sewer lines IS
Options:
2 Sump
3.
Soak pit
4.
Septic tank
Question Number: 68 Question Id 4568 Question Type: MCQ Correct: 1.0 Wrong; 0.0
Which of the following is not an orthographic prOjection
Options:
1.
Plan
2.
ElevatIon
3.
Section
4.
IsometrIC V,ew
Question Number: 69 QuutiDD Id 4569 Question MCQ Correct: 1.0 Wrong: 0.0
Height of a building in elevation is measured from
Options:
1.
Foundation level
2.
Ground level 3 Floor level
4. SIll level
Question Number: 70 Question Id 4570 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Soiled water disposal is from
Options:
1 Bath tub
2.
K,tchen sink
3.
Water closet 4 waSh baSin
Question Number: 71 Question Id 4571 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The elevation given represents
I. 8"""
Options:
1.
Rail
2.
Stye
3.
Head
4.
Post
Question Number: 72 Question Id 4572 TYIM! MCQ Correct: 1.0 Vrong: 0,0
piles are those which are driven into the ground until a hard stratum is reached
Options:
1 Fnctlon
2 Sheet 3 Beating
4 Anchor
Question Number: 73 Question Id 4573 Typt MCQ Correct: 1.0 Vrong: 0.0
The minimum headroom in a passage under the landing of a staircase and under the staIrcase shall be m
Options:
1 2.2 2 25
3 27
4 15
Question Number: 74 Question Id 4574 Question TYI)f MCQ Correct: t.O Wrong: 0.0
The fIgure gIven below represents
Options:
1 Door 2 WIndow 3 VentilatOr 4 Stair
Question Number: 75 Question Id 4375 Question Typt MCQ Correct: 1.0 Vrong: 0.0
The plumbmg fixture gIven in the fIgure IS
Option, I European W.C 2 IndIan WC
3. BIdet 4 Anglo -IndIan WC
QueSl;on Number: 76 Question Id 4576 Question Type: MCQ Correct: 1.0 Vrong: 0.0
What IS the prinCIple of compass surveYIng?
Options:
I Traversing 2 F,eld plomng
3. Contourmg 4 Tnangula Ion
Question Number: 77 Question Id 4577 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
In Simpson's formula of area calculation, the line jOining the tOP of the ordinates is assumed as
Options:
1.
Circular
2.
Parabolic 3 ElliptICal 4 StraIght line
Queslioll Number: 78 Queslion Id 4578 Queslion Type: MCQ
Correcl 1.0 Vrong: 0.0
Earth work volume IS gIven by common diStance/3 (Sum of areas of end sectIons 4 times the sum of areas of even sectIons+ 2 times the sum of areas of odd section) In Formula
Options:
I Pnsmoidal 2 Trapezoidal
3. Rectangular 4 CIrcular
Question Number: 79 Question Id 4579 Question Type: MCQ Correct: 1.0 Wrong: 0.0
What is RB in compass surveying?
Options:
L Reference Boundary
2.
Reduced Bearing
3.
Reduced Boundary
4.
Reference Beanng
Question Number: 80 Question Id 4580 Question Type: MCQ Correct: 1.0 Vrong: 0.0
Which prevents the magnetic needle from showing magnetic north
Options:
L Surveyor attraction
2.
Gravitational attraction
3.
Local attraction
4.
Wooden Tnpod
Question Number: 81 Question Id 4581 Question MCQ Correct: 1.0 Wrong: 0.0
The horizontal axis in theodolite is also known as
Options:
1. Collimalion axis
2. Trunmon axis
3.
Bubble level axis
4.
Plumb axiS
Question Number: 82 Question Id 4582 Question Type: MCQ Correct: 1.0 Vrong: 0.0
Latitudes and Departures are used to calculate
Options:
L area
2.
fore bearing
3.
back beanng
4.
Elevation
Question umber: 83 Question Id 4583 Question Type: MCQ Correct: 1.0 Wrong: 0.0
In a rectangular plot of land, ABCD, the bearing of the hne AS IS 28", the bearing of CD is
Options:
188"
1. 208"
2.
168"
3.
152"
Questiun Number: 84 Question Id: 4584 Question Type: MCQ
Con-eel: 1.0 Wrong: 0.0
Spmt level is used to
Options:
1 first aid 2 proflle levellIng 3 levellIng the Instrument 4 dean the level
Question umber: 85 Question Id 4585 Question Type: MCQ
Cor..'t 1.0 Wrong: 0.0 Where is first change point in the folloWIng readings on contInUOuS SlopIng ground? 3 855, 3.285, 1.955, 3215, 1 700, 0.540, 3.640
Options:
1 after 1 955 2 after 3215 3 after 3285 4 after 3 855
Question umber: 86 Question Id 4586 Question TYIlt MCQ Correct: 1.0 Wrong: 0.0
The dimension of the smallest division on the levelling staff is
Options:
1 0.050 m 20 SOOm 3 0.005m
4 0.001 m
Question NUlllber 87 Question Id 4587 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The cross sectional area of an Embankment is given by., where b is top Wldth, s is side stope and h is height
Options:
1 h 2 h 3 h 4 h
Question Number: 88 Question Id 4588 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The fundamental prinCIple of surveying 15 to work from the
Options:
1 part to the whole 2 whole to the part 3 centre to the outer 4 part to the sectlon
Question umber: 89 Question Id 4589 Question Type: MCQ
Cor..,t 1.0 Wrong: 0.0 Number of links in a 20 m Chain are
°l,tions:
2 150 3 100 4 66
Question umber: 90 Question Id 4590 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The line on which frame work of the survey IS planned Options 1 Check hne
2 Plan hne 3 Base line 4 T,e hne
Qurstion Number: 91 Question Id: 4591 Question Type: MCQ Correct: 1.0 Wrong: 0.0
In site plan of the bUlldmg, which set back IS usually more?
Options:
1 front 2 left SIde
3. right SIde 4 rear
Question Number: 92 Question Id 4592 Question TyPf MCQ Correct: 1.0 Wrong: 0.0
Two continuous parallel lines symbol indicates the
Options:
1 Foot path 2 Metalled road
3. Unmetalled road 4 Smgle railway hne
QutStion Number: 93 Question Id 4593 Question Type: MCQ Correct: 1.0 Wrong: 0.0
ChaIn survey is suitable when the given area is
Options:
1 SlfTlple faIrly level 2 Undulating 3 Crowded WIth features 4 Filled WIth lot of obstructions
Question Number: 94 Question Id 4594 Question Type: MCQ Corred 1.0 Wrong: 0.0
Well conditioned triangle contains angles between (in degrees)
Options:
1 30 and 120 2 20 and 140 315and150 418and144
Question NUllIber 95 Question Id 4595 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
The Cham man who the chain m chain surveYing IS known as
Options:
1 Follower 2 Captain 3 Ranger Leader
Question Number: 96 Question Id 4596 Question Type: llCQ Corrert 1.0 Wrong: 0.0
In setting out nght angle on cham, which of the folloWIng set of dimensions are usually taken
Options:
1 5-12-13m
26-8-10m
3 3-4-5m
4 m
Question Number: 97 Question Id 4597 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The main survey stations are located on the ground, by
Options:
1 reference sketch
2 lOde>< sketch 3 rough sketch rnain sketch
Question Number: 98 Question Id 4598 Question Type: l1CQ Correct: 1.0 Wrong: 0.0
The symbol gIven, indicates
...
I
I1 I .J
Options:
1 Orchard
2 Hedge
3 Wire fencmg
Railway
Question Number: 99 Que tion Id 4599 Question Type: l1CQ Correct: 1.0 Vrong: 0.0
The symbol given indicates
Options:
3.
Bench mark
4.
Base mark
Queslion Number: tOO Question Id 4600 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The symbol gIven indicates
•
Options:
1.
Bench mark
2.
Barren land
3.
Cultivated land
4.
Boundary Pillar
Question Number: 101 Question Id 4601 Question Type: MCQ
1.0 Wrong: 0.0 Planimeter method of calculation of area is ... method
Options:
1.
statistICal
2.
analytical 3 Instrumental
4. ordinate
Question Number: 102 Question Id 4602 Question Type: MCQ Correct: 1.0 Vrong: 0.0
In which corner, on the plotted sheet, the title block is drawn?
Options:
1 right top
2.
left top
3.
right bottom 4 left bottom
Question Number: 103 Question Id 4603 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Which of the following is not used to set out a perpendicular on a chain line
Options:
1.
French cross staff
2.
OptiCal square
3.
Site square
4.
Brass Tag
Question Number: 104 Question Id 4604 Question Type: MCQ COrTcct 1.0 Vrong 0.0
The limiting length of an offset does not depend upon
Options:
1.
The number of features to be surveyed
2.
Accuracy of work
3.
Maximum error In laYing off the direction of offset
4 Scale of plottmg
Question umber: 105 Question Id 4605 Question Type: MCQ Correct: 1.0 Vrong 0.0
V'Jhat is the principle of chain surveying?
Options:
1 Traversing
2.
Follower and surveyor
3.
Contouring 4 Triangulation
Question Number: 106 Question Id 4606 Question Type: MCQ Correct: 1.0 Vrong: 0.0
The levelling from the finishing pOint of a day to starting point of that day is known as
Options:
1. Check LevellIng 2 Profile levelling
3.
Fly levelling
4.
Differential levelling
Question Number: 107 Question Id 4607 Question Type: MCQ Correct: 1.0 Vrong: 0.0
Following colour is used to indicate the symbol of footpath
Options:
1.
Prussian blue
2.
Black
3.
Crimson lake
4.
Yellow
Question Number: 108 Question Id 4608 Question Type: I1CQ Correct: 1.0 Wrong: 0.0
Express the scale 1 cm 4min RF
Options:
1 1/200
2.
1/300
3.
1/400 4 1/800
Question Number: 109 Question Id 4609 Question Type: MCQ Correct: 1.0 Wrong: 0.0
the diaphragm is fitted in front of
Options:
1.
rruddie of telescope
2.
bubble tube
3.
object glass
4.
eye piece
Question Number: 110 Question Id 4610 Question Type MCQ Correct: 1.0 Wrong; 0.0
Options:
N 74'W
1.
N E
2.
S 74'W
3.
S E
4.
Question Number: 111 Question Id: 4611 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The bench marks established by the Survey of India are known as bench marks.
Options:
1. Permanent 2.GTS 3 Temporary
4. Arbitrary
Question Number: 112 Question Id 4612 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Which of the following is not a natural error in levelling?
Options:
1.
Earth's curvature
2.
Re fraction
3.
Temperature variation
4.
Error due to sluggIsh bubble
Question Number: 113 Question Id 4613 Question Type: MCQ Correct: 1.0 Wrong: 0.0
In the prismatic compass, which end of the graduation ring is marked with zero?
Options:
1.
North
2.
East
3.
South 4 West
Question Number: 114 Question Id 4614 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The prismatic compass box is generally made of
Options:
1 Brass
2 Iron
3.
Silver
4.
Alurrunlum
Question Number: 115 Question Id: 4615 Question Type: MCQ Correct: 1.0 'Vrong: 0.0
The maximum angular error of closure (tn Minutes) in Compass survey, with N number of sides, IS
Options:
1
1S"lN
2
2S"IN
3.
1O"IN
4.
Question Number: 116 Question Id 4616 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The dip of the magnetic needle at the equator of the earth, in degrees is
Options:
1. 270
2. 180
3. 90
4. 0
Question Number: 117 Question Id 4617 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
The fore bearing of a line AB is N2so30'E, what is rts Back bearing?
Options:
N2so30'W
1.
S2so30'W
2.
S2so30'E
3.
N64°30'E
4.
Question Number: 118 Question Id 4618 Question MCQ Correct: 1.0 Wrong: 0.0
A plane whICh is tangential to the level surface at a point is
Options:
1.
Honzontal plane
2.
Vertical Plane
3.
Tangential plane
4.
Level plane
Question Number: 119 Question Id 4619 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
Prism is used to take the reading in 1. Surveyor's compass 2. Prismatic compass 3. Level
Options:
1 10niy
2 2 only
3.
1and 2
4.
1and3only
Question Number: 120 Question Id 4620 Question Type: MCQ Correct: 1.0 "hong: 0.0
Length of the telescopic levelling staff IS
Options:
1. 2m
25m 34m 4.3m
Qurstion Numbtr: 121 Question Id: 4621 Question Type: 1CQ Correct: 1.0 Wrong: 0.0
Convert the WCB 188' into RB
Options
N8'W
1
E
2
S8'W
3
S E
4
Question umber: 122 Question Id 4622 Question Type: 1CQ Correct: 1.0 Wrong: 0.0
The staff reading obtaIned on a point of known elevation is called as
Options
1 fore slgnt readIng
2. Intermediate sight reading 3 back sight reading 4 baCking Sight readIng
Question Numbu: 123 Question Jd 4623 Question Type: MCQ Correct: t.O Wrong: 0.0
GTS in surveying means
Options:
1 Great Tangential survey 2 Great Tngonometncal survey
3 Global Tngonometncal survey
4 Global Team survey
Question Numbtr: 124 Question Id 4624 Question Type: l1CQ Correct: 1.0 Vrong: 0.0
Anthme Ical check for Height of Instrument method IS given by sum of back SIghts -sum of fore SIghts
OptiOns
1 Last RL -FITSt RL 2 Last RL FITSt RL 3 FITSt RL -Last RL 4 ?BS -bench mark
Quostion umbo.: 125 QUfStion Id 4625 Question Type: lCQ Correct: 1.0 Wrong: 0.0
The Perrrussible error in Accurate levelhng, If Distance In kilometers
Options:
1 0.012
0.12,1d
2.
0.00012,ld
4.
Question Number: 126 Question Id 4626 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Levelling done along the centre of the road at a regular interval is known as
Options:
1.
C S Levelling
2.
ProflIe levellIng
3.
Differential levellIng
4.
Fly levellmg
Question Number: 127 Question Id 4627 Question Type: MCQ
Correct; 1.0 Wrong: 0.0
The imperfect levelling of the instrument comes under
Options:
1.
Personal error
2.
Instrumental error
3 Natural error
4. Permanent error
Question Number: 128 Question Id 4628 Question TYI.e MCQ Correct: 1.0 Wrong: 0.0
Back sight taken on bench mark of 100.00 m is 2.600 and foresIght of a point IS 2.500. What is the RL of this point?
Options:
1. 101.10m 2.99.10m 39990m
4.100.10 m
Question "'umber: 129 Question Id 4629 Question Type: MCQ Correct: 1.0 Wrong: 0.0
In plotting of cross section, the usual horizontal and vertical scales are ..... respeCtively
Options:
1.
1:400, 1:100
2.
1 400, 1:200
3.
1:400, 1:300
4.
100, 1:400
Question Number: 130 Question Id 4630 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
The bench mark provided at the end of the day's work in longitudinal levellIng IS called ...... Bench mark
Options:
1.
GTS
2.
Permanent
3.
Temporary
4 Dally
Question Number; 131 Question Id: 4631 Question Type: MCQ Correct: 1.0 Wrong: 0.0
A contour line intersects a ridge line or valley hne
Options:
1. Perpendicularly always at 30· to Vertical
2
3 always at 45·
4 HonzOntally
Question Numb.r: 132 Question Id 4632 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The vertical distance between adjacent contour hnes IS
Options:
1 VertICal gradient 2 COntour interval 3 Vertical eqUl"alent
4. Ridge Interval
Question Number: 133 Question Id 4633 Question Type: MCQ Correct: 1.0 Vrong: 0.0
In a contour map. the higher value contours are towards inside the loop. This indicates
Options:
1. Hill 2 Pond
3. Level ground 4 Valley
Question Number: 134 Question Id 4634 Question Type: I1CQ Correct: 1.0 Wrong: 0.0
The alignment of highway is usually fOllows
Options:
1 valley hne 2 ridge line
3. across the contour line 4 perpendICular to ndge hne
Question Number: 135 Questioold 4635 Question Type: 1CQ Correct: 1.0 Vrong: 0.0
What survey instrument IS used to calculate the capacity of reservOir
Options:
1 Cham
2. Compass 3 Plane table 4 Level
Question Number: 136 Question Id 4636 Question Type: MCQ Correcl 1.0 Wrong: 0.0
The method used to calculate the capacity of reservolf
Options:
1 contounng 2 chfferentlalleveJhng 3 Plane table surveY'ng 4 SecuonlOg
Question 'umber; 137 Question Id 4637 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The contour mterval for a any map IS kept
Options:
1 zero 2 vanable 3 gradually mcreaslOg 4 constant
Question 138 Question Id 4638 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Contours of dIfferent elevations, crossIng each other Indicates
Options:
1 saddle 2 verucal clIff 3 overhanging clI rf 4 sloping clIff
Question Number: 139 Question Id 4639 Question Type: MCQ Correct: 1.0 Wrong: 0.0
The surveyor raises his both hands above head and then brings down, his intention is
Options:
1 ASSistant to move left 2 ASSistant poSltion IS correct 3 ASSistant to move nght 4 Asslstant to fix the rangmg rod
Question 'umber: 140 Question ld 4640 Question Type: MCQ
Correct: 1.0 Wrong: 0.0 When both ends of the survey are not mtervlslble, the rangmg adopted is
Options:
1 Parallel rangmg 2 D,rect rangmg 3 Anal rangmg 4 IndIrect rangmg
Question 'umber: 141 Question Id: 4641 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Length of the commonly used ranging rod is
Options:
12m 23m 34m
41 m
Question Number: 142 Question Id 4642 Question Type: MCQ Correct: 1.0 Wrong: 0.0
What are the errors in compass surveYing 1 Personal 2 Instrumental 3. Natural
Options;
1 1 and 2 only 2 1,2 and 3 3 2 and 3 only 4 3 only
Question Number: 143 Question Id 4643 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
In pnsmauc compass, which is used to stop the osallauons of the graduated nng?
Options:
1 LI fung pin 2 Pnsm 3 Brake PIO
4. Glass cover
Question Number: 144 Question Id: 4644 Queslion Type: l1CQ Correct: 1.0 Wrong: 0.0
Determining the difference in elevation between two POlOtS on the surface of the earth, is known as
Options:
1. Differential levelling 2 Simple levelltng 3 Block levelling 4 Fly levelltng
Question Number: 145 Question Id: 4645 Question Type: MCQ Correct: 1.0 Wrong: 0.0
Lateral distance of an object or feature measured Wlth reference to a survey line IS called as
Options:
1 Lalltude 2 Departw'e 3 Offset 4 Field length
Question 'umber: 146 Question Id 4646 Questioo Type MCQ
Correcl 1.0 Wrong: 0.0
True North is west of Magnetic North by 4" This is known as
Option.s
1. Dechnation East 2 DeclInatIOn West 3 Decllnatlon South 4 Dechnatlon North
Question Number: 147 Question Id: 4647 Question TyIX MCQ
Correct: 1.0 Wrong: 0,0
Options:
1 adde<l 2 doubled 3 subtracte<l 4 muItiplie<l
Question Number: 148 Question Id 4648 Question MCQ
Correct: 1.0 Wrong: 0.0
Which of the folloWIng hnes length and magnetic bearings are measured to check the accuracy of open traverse?
Oplions:
1 OblIque offsets
2 Cut-off hnes 3 Base lines 4 Feature lInes
Question umber: 149 Question Id 4649 Question MCQ Corrtd 1.0 Vrong: 0.0
Which of the following IS not a type of variation of magnetic decImation
Options:
1 Annual vanatlon 2 Secular anatlon
3.
Diurnal variation
4.
Thermal vanatlon
Question Number: ISO Question Id 4650 Question Type: MCQ
Correct: 1.0 Wrong: 0.0
In a closed traverse of sides, what IS the sum of the measure<l interior angles, generally as a check?
Options:
(2n
1.
(2n x90' 2.
3 (2n x
(2n
4.
Other Question Papers
Subjects
- accounts and auditing
- automobile engineering
- civil
- commerce
- computer science
- electrical
- electrical engineering
- electronics and communication engineering
- general studies
- mechanical
- mechanical engineering