Exam Details
| Subject | Basic Control Theory | |
| Paper | ||
| Exam / Course | B.Tech in Aerospace Engineering (BTAE) | |
| Department | School of Engineering & Technology (SOET) | |
| Organization | indira gandhi national open university | |
| Position | ||
| Exam Date | June, 2016 | |
| City, State | new delhi, |
Question Paper
1. Distinguish between the following:
Open and Closed loop control systems
PI controller and PID controller
2. Explain the modelling of DC motors and servo systems with the help of examples.
3. Explain the role of the following with respect to signal conversion and processing during system design
Servo Components
Synchros
Sensors
Actuators
Computers
4. Write short notes on the following:
Routh's Criterion
Root Locus Method
Explain phase margin and gain margin with the help of an example.
Explain transient response to an input with the help of an example.
6. Determine whether the characteristic equations given below have stable or unstable roots
<img src='./qimages/10459-6.jpg'>
7. Discuss briefly the dynamics of stable and unstable systems. Derive a transfer function for long period or phugoid dynamics.
8. What is BODE magnitude plot What are stability margins on the BODE plot? Explain with the help of examples.
9. Write notes on the following:
Effect of poles and zeroes on root locus plot
Importance of Fourier transforms in control theory
Open and Closed loop control systems
PI controller and PID controller
2. Explain the modelling of DC motors and servo systems with the help of examples.
3. Explain the role of the following with respect to signal conversion and processing during system design
Servo Components
Synchros
Sensors
Actuators
Computers
4. Write short notes on the following:
Routh's Criterion
Root Locus Method
Explain phase margin and gain margin with the help of an example.
Explain transient response to an input with the help of an example.
6. Determine whether the characteristic equations given below have stable or unstable roots
<img src='./qimages/10459-6.jpg'>
7. Discuss briefly the dynamics of stable and unstable systems. Derive a transfer function for long period or phugoid dynamics.
8. What is BODE magnitude plot What are stability margins on the BODE plot? Explain with the help of examples.
9. Write notes on the following:
Effect of poles and zeroes on root locus plot
Importance of Fourier transforms in control theory
Other Question Papers
Departments
- Centre for Corporate Education, Training & Consultancy (CCETC)
- Centre for Corporate Education, Training & Consultancy (CCETC)
- National Centre for Disability Studies (NCDS)
- School of Agriculture (SOA)
- School of Computer and Information Sciences (SOCIS)
- School of Continuing Education (SOCE)
- School of Education (SOE)
- School of Engineering & Technology (SOET)
- School of Extension and Development Studies (SOEDS)
- School of Foreign Languages (SOFL)
- School of Gender Development Studies(SOGDS)
- School of Health Science (SOHS)
- School of Humanities (SOH)
- School of Interdisciplinary and Trans-Disciplinary Studies (SOITDS)
- School of Journalism and New Media Studies (SOJNMS)
- School of Law (SOL)
- School of Management Studies (SOMS)
- School of Performing Arts and Visual Arts (SOPVA)
- School of Performing Arts and Visual Arts(SOPVA)
- School of Sciences (SOS)
- School of Social Sciences (SOSS)
- School of Social Work (SOSW)
- School of Tourism & Hospitality Service Sectoral SOMS (SOTHSM)
- School of Tourism &Hospitality Service Sectoral SOMS (SOTHSSM)
- School of Translation Studies and Training (SOTST)
- School of Vocational Education and Training (SOVET)
- Staff Training & Research in Distance Education (STRIDE)
Subjects
- Aerodynamics- I
- Aerodynamics- II
- Aircraft Design/Launch Vehicle/ Rocket Design
- Aircraft Instruments
- Aircraft Safety and Maintenance Engineering
- Aircraft Structures
- Aircraft Systems And Airworthiness Requirements
- Applied Chemistry
- Applied Physics
- Basic Control Theory
- CNS-ATM system
- Composite Materials
- Computer Fundamentals
- Engineering Drawing
- Environmental Science
- Flight Mechanics
- High Speed Aerodynamics
- Instruction To Computer Play Device
- Introduction to Aeronautics
- Introduction To Rocket And Missiles
- Mechanics Design
- Propulsion- I
- Propulsion- II
- Rocket Propulsion
- Space Dynamics
- Strength of Materials
- Technical Writing and Communication Skills
- Workshop Technology